| Hotline | Sale：(852) 2686 8292 |
| WhatsApp：(852) 5492 2227 | |
| Fax | (852) 2686 8027 |
| kf-sales@kingfung.com.hk | |
| Working Hours | Mon-Fri：9:00-18:00 |
| Close on Sat, Sun and all other public holidays |
E3C252D4ID2
ModelE3C252D4ID2
Deep mini-ITX (6.7" x 8.2")
Supports Intel? Xeon? E-2300 and 10th Gen Intel? Pentium? series processors
4 DIMM slots (2DPC), supports ECC/non-ECC UDIMM
1 PCIe4.0 x16
1 OCuLink (PCIe3.0 x2 or 4 SATA 6Gb/s), 1 OCuLink (2 SATA 6Gb/s)
IPMI
立即查詢
Specification
| Physical Status | |
| Form Factor | Deep mini-ITX |
| Dimensions | 6.7" x 8.2" |
| Processor System | |
| CPU | Supports Intel® Xeon® E-2300 and 10th Gen Intel® Pentium® series processors |
| Socket | Single Socket H5 (LGA1200) |
| Thermal Design Power | 95W |
| Chipset | Intel® C252 |
| System Memory | |
| Supported DIMM Quantity | 4 DIMM slots (2DPC) |
| Supported Type | DDR4 288-pin ECC/non-ECC UDIMM |
| Max. Capacity per DIMM | 32GB |
| Max. DIMM Frequency |
3200MT/s* *Up to DDR4 2666MT/s when installing 10th Gen Intel® Pentium® Series Processors |
| Voltage | 1.2V |
| PCIe Expansion Slots (SLOT7 close to CPU) | |
| PCIe x 16 |
SLOT7: PCIe4.0* x16 [CPU] *SLOT7 supports PCIe3.0 only when installing 10th Gen Intel® Pentium® Series Processors |
| Other PCIe Expansion Connectors | |
| M.2 slot |
1 M-key* (PCIe4.0 x4); support 2280 form factor [CPU] 1 M-key (PCIe3.0 x4); support 2280 form factor [PCH] *M.2 from CPU will not fuction when installing 10th Gen Intel® Pentium® Series Processors |
| OCuLink |
1 OCuLink (PCIe3.0 x2 or 4 SATA 6Gb/s) [PCH] 1 OCuLink (2 SATA 6Gb/s) [PCH] |
| SATA/SAS Storage | |
| PCH Built-in Storage |
Intel® C252 (Up to 6 SATA 6Gb/s; RAID 0/1/5/10): 2 OCuLink |
| Ethernet | |
| Additional GbE Controller | 2 RJ45 (1GbE) by Intel® i210 |
| Server Management | |
| BMC Controller | ASPEED AST2500: iKVM, vMedia support |
| IPMI Dedicated GLAN | 1 RJ45 Dedicated IPMI LAN port by Realtek RTL8211E |
| Graphics | |
| Controller |
ASPEED AST2500: 1 DB15 (VGA) |
| Rear I/O | |
| UID Button/LED | 1 UID button w/ LED |
| VGA Port | 1 DB15 (VGA) |
| USB 3.2 Gen1 Port | 2 Type A (USB3.2 Gen1) |
| RJ45 | 2 RJ45(1GbE), 1 dedicated IPMI |
| Internal Connector/Headers | |
| Power Connector | 1 (4-pin, ATX PSU signal) w/ ATX 24-pin adapter cable, 1 (8-pin, ATX 12V) support 12V DC-in |
| Other Power Connectors | 1 (4-pin) for HDD power when using 12V DC-in power source |
| Auxiliary Panel Header | 1 (9-pin): chassis intrusion, system fault LED, LAN1/LAN2 activity LED, locate |
| System Panel | 1 (9-pin): power switch, reset switch, system power LED, HDD activity LED |
| COM Header | 1 |
| Fan Header | 3 (4-pin) |
| Thermal Sensor Header | 1 |
| TPM Header | 1 (13-pin, SPI) |
| SGPIO Header | 1 |
| SMBus header | 1 |
| PMBus header | 1 |
| IPMB Header | 1 |
| Clear CMOS | 1 (contact pads) |
| Others | 1 NC-SI, 1 UID header |
| USB 3.2 (Gen1) Header | 1 (19-pin, 2 USB3.2 Gen1) |
| LED Indicators | |
| Standby PWR LED 5vsb | 1 |
| Fan Fail LED | 3 |
| BMC heartbeat LED | 1 |
| System BIOS | |
| BIOS Type | AMI 256Mb SPI Flash ROM |
| BIOS Features |
Plug and Play(PnP), ACPI 6.2 and above compliance wake up events, SMBIOS 3.3 and above, ASRock Rack Instant Flash |
| Hardware Monitor | |
| Temperature | CPU, PCH, MB, Card side Temperature Sensing |
| Fan |
Fan Tachometer CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by CPU Temperature) Fan Multi-Speed Control |
| Voltage | VCORE, VCCSA, VCCM, 3V, 5V, 12V, +1.05V_PCH_AUX, +BAT, 3VSB, 5VSB, VCCIO, +2.5V_VPP |
| Environment | |
| Temperature | Operation temperature: 10°C ~ 35°C / Non operation temperature: -40°C ~ 70°C |
| Humidity | Non operation humidity: 20% ~ 90% ( Non condensing) |
| Model | E3C252D4ID2 |
Recommended For You
Contact Us
Online Store
Follow us
| Copyright ©2020 King Fung Electronics Co., Ltd. | All rights reserved. |  粵公網安備 44030402001337號 | 粵ICP備18146990號 |
|
| 電話:(0755)8375 9168 | 電郵:sales@kingfung.com |